Current Parameter; Programming; Configuration Options In Progcard I Mode - KONTRONIK PROGDISK Manual

By navigating the menu-bar to the option of chice
and subsequent enter you arrive at the next
submenu.

6.2.1 Current Parameter

This submenu shows all active parameters with
their current setting. The setting is displayed at the
lower end of the display. An arrow on the left side
shows whether the menu is continued in any
direction.
The submenu Current Parameter does not allow
!
changing a parameter.

6.2.2 Programming

The submenu Programming
configuration of the ESC' individual parameters. To
adjust a parameter navigate the menu-bar to the
respective parameter and enter. You arrive at the
submenu of the parameter and can choose the
desired setting. An asterisk marks the currently
active setting.
16
Confirming or enter of marked menu items leads to
storing. Repeated enter allows new adjustment.
6.2.2.1
Brake
Battery Type
Battery Empty
allows the
Cut Off At
RPM – Start Up
Configuration options in
PROGCARD I mode
Switch on or off of integrated EMF brake.
Selects the connected
(LiPo,NiCd/NiMH)
Behavior of ESC at empty battery status. The
ESC can either shut down or slow down.
Adjustment of the shut down or slow down
voltage. If the voltage of the battery falls below
this point the ESC either shuts down or slows
down the motor power.
Allows setting a fast or smooth motor reaction
type of battery.