Handling; Activation; Escs Without Online Updateability - KONTRONIK PROGDISK Manual

red. If the button is pushed in neutral
position the marked menu item is selected.
2. Continuous. Tilting the PROGDISC results in
scrolling through the menu as soon as the
navigation blocks
PROGDISC back into the neutral position
pauses scrolling. The menu item is confirmed
by pushing the button.
3. Jump – Lock. Tilting the PROGDISC results in
a stepwise scrolling through the menu as soon
as the navigation block is red. In order to move
on to the next menu item the PROGDISC
needs to be brought into the neutral position
again. By tilting the PROGDISC again the next
menu item can be reached. The menu item is
confirmed by pushing the button.
back
6.

Handling

6.1

Activation

By pressing the confirmation button (4) the
PROGDISC is activated.
information will be visible on the color display (3).
The factory setting for the menu language is
!
English. The language can be changed
SETTINGS – LANGUAGE
(see also 6.2.4.1)
After activation you will be asked to connect your
KONTRONIK ESC via the ESC cable (2) to the
PROGDISC. As soon as the ESC is connected you
arrive at the next menu by enter. Online updateable
ESC set up the electronic connection automatically.
After 15 seconds
automatically to point 6.2.
is red. Bringing
Next menu item
enter
Previous menu item
After activation
you will be forwarded
the
6.2

ESCs without online updateability

If an ESC, which is not online updateable is
connected to the PROGDISC the user has the
choice between
PROGCARD I and PROGCARD II. For online
updateable ESCs this choice is not necessary.
Please note that only ESCs of the JIVE series
!
are PROGCARD II compatible.
!
Please refer to the manual of your ESC whether
it is online updateable.
Navigate the menu bar to the configuration option
of choice and confirm by pushing the confirmation
button or cant right. The PROGDISC is conntecting
to the ESC now.
After choosing the configuration option you arrive at
the main menu. From here you can:
1. Read-out actual parameters
2. Program individual parameters
3. Adjust system settings
4. Read-out KONTRONIK contact
two configuration settings:
15