Application; General Description; Delivery Contents; Overview - Parkside PS 2900 A1 Translation Of The Original Instructions

Application

The power generator is suitable for devices
designed for operation at a 230 V AV volta-
ge source.
The power generator is intended for driving
power tools and as a power supply for light
sources.
In case of household appliances please
check the relevant manufacturer specifica-
tions regarding suitability.
Any other use that is not explicitly ap-
proved in these instructions may result in
damage to the equipment and represent a
serious danger to the user.
The manufacturer will not be held respon-
sible for injuries resulting from use which
does not comply with the directions, or
from incorrect use.
This equipment is not suitable for commer-
cial use. Commercial use will invalidate the
guarantee.

General description

The illustration of the princi-
pal functioning parts can be
found on the front and back
foldout pages.

Delivery Contents

Unpack the equipment and check that it is
complete:
- Power generator
- 2 wheels
- 1 wheel axle with thread M12
- 2 bases
- 1 sliding bracket holder
- 1 sliding bracket
- 4 screws M6 x 40
- 4 nuts M6
- 4 washers for wheel mounting
- 2 nuts M12 for wheel mounting
- 1 spark plug wrench
- 1 oil filling funnel
- 1 oil bottle
- 1 multitool slot/cross (disassembled)
- Instruction manual

Overview

1 Fuel cap
2 Fuel gauge
3 Petrol filter
4 Ground connection
5 Wheels
6 Overload switch
7 2 x 230 V~ sockets
8 Voltmeter
9 Oil tank cap with dipstick
10 Oil drain screw
11 Oil low safety device (see
12 Bases
13 On/Off switch
14 Start rope
15 Sliding bracket
15a Sliding bracket holder
16 Petrol tap (see
17 Choke lever (see
18 Air filter housing
19 Multitool handle
20 Multitool bit slot/cross
21 Wheel axle M12
22 Schrauben M6 x 40
23 Nuts M12 for wheel mounting
24 Nuts M6
25 Washers for wheel mounting
26 Oil bottle
27 Spark plug wrench
28 Oil filling funnel
29 Spark plug connector
30 Spark plug
31 Filter element
GB IE NI
)
)
)
5