Advertisement
TROUBLESHOOTING
If your desk does not function properly (does not go
up or down; does not move at all) please do the RESET:
Button PA:
1. Simultaneously pressing the up and down buttons for minimum of 8 seconds.
2. Press and hold the down button and the desk will slowly move the lowest point possible.
3. The desk/stand is ready for normal use
Button NA:
1. Push both buttons for minimum 7 sec.
2. Drive the columns to lowest level.
3. Ready for use
If this does not work please contact your seller.
IMPORTANT
80
Functional load of desk is 80 kg.
Do not exceed this given load.
KG
1
! Please keep in mind that time for continuous desk movement
upwards or downwards is 1 minute.
MIN
9
After 1 minute of unstopped operation there has to be a resting
period of 9 minutes.
MIN
40
Travel Speed Up to 40 mm/s.
MM/S
www.narbutas.com
Advertisement
