Advertisement

Quick Links

veito
AERO S
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY
AND RETAINED FOR FUTURE REFERENCE
User manual

Advertisement

Table of Contents
loading

Summary of Contents for veito AERO S

  • Page 1 AERO S THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE User manual...
  • Page 2: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS Read all instructions before installing or using this heater. Installation and repair must be carried out by a qualified and licenced person only. Improper installation, adjustment, alteration, service or maintenance can cause personal injury, property damage or death. The installer is to ensure that the requirements of the local authority, local electrical installation code, municipal building codes, and any other relevant statutory regulations are carried out.
  • Page 3 Do not attempt to alter the unit in any manner. Do not paint any surface of the heater. Do not touch the heater with wet hands at any time. Do not insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire or damage the heater.
  • Page 4 This heater must be mounted at a minimum of 1800 mm above the floor. INTRODUCTION The AERO S carbon infrared heater is engineered as a robust indoor-outdoor heater. Every component in the AERO S heater is optimized for performance. That includes the veito carbon infrared tube producing mid-wave infrared heat.
  • Page 5: Operation

    OPERATION Press one of the 1 2 3 4 buttons on the remote control to turn the heater on. Press ON button to turn on the heater in previous settings. Press OFF button to turn the heater off. You can also use the button on the unit to operate the heater. REPLACING THE BATTERY Press the battery compartment release button and then slide out the battery tray.
  • Page 6: Installation

    INSTALLATION Installation must be carried out by a licensed and authorised person only. Only connect the appliance to a power supply that conforms to the specification stated on rating plate. This heater must be installed according to the minimum installation clearances shown in the diagrams.
  • Page 7 Min. 500mm Min. 500mm Max. 45° angle Max. 90° angle Min. 1800mm clearance to floor...
  • Page 8 For electrical products sold within the European Community. At the end of the electrical products useful life it should not be disposed of with household waste. Please recycle where facilities exist. Check with your Local Authority or retailer for recycling advice in your country. www.veito.com...

Table of Contents