veito Blade Instructions Manual
Carbon infrared heater
Hide thumbs
Also See for Blade:
- Installation instructions manual (41 pages) ,
- Instructions manual (6 pages) ,
- Instructions manual (20 pages)
Related Manuals for veito Blade
Summary of Contents for veito Blade
- Page 1 INSTRUCTIONS FOR CARBON INFRARED HEATER KARBON INFRARED ISITICI ‹Ç‹N TAL‹MATLAR MODEL : Blade...
-
Page 2: Important Safety Instructions
THESE INSTRUCTIONS SHOULD BE READ CAREFULLY AND RETAINED FOR FUTURE REFERENCE. We cannot be liable for any damages caused by failure to observe these instructions. IMPORTANT SAFETY INSTRUCTIONS When using electrical appliances, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: Read all instructions before installing and using this heater. - Page 3 INTRODUCTION The veito carbon infrared heaters produce instant and comfortable heat like the sun. These robust and weatherproof heaters are designed for domestic and commercial heating applications within indoor or outdoor areas.
-
Page 4: Installation
INSTALLATION This heater should be installed by a competent person. i.e. a qualified electrician. Always disconnect the heater from the electricity supply and allow it to cool before installation. This heater can be mounted in a horizontal or vertical manner. For both wall and ceiling mounting, the lowest part of the heater must be located at or above a minimum height of 1.8m from ground level, so that the heater can not be touched when in operation. - Page 5 Ceiling Wall Floor FIG. A Ceiling Wall Floor FIG. B...
-
Page 6: Operation
OPERATION • Press the power button to turn the heater on. • Press the level button then change the power setting by pressing the arrow buttons. • Press the auto button then set the desired temperature by pressing the arrow buttons. •...