Table of Contents
Advertisement
Impact Welding – Using Impact clip
Impact welding is the term used for welding wires to a
conductive metal surface. This process is common when
thermocouples are required to be welded to a test piece/
structure or similar application.
The impact welding clip attachment should be plugged
into the black negative (-) socket on the front of the L60+
welder. The impact clip should then be attached in close
proximity to where the thermocouple is required to be
attached.
The thermocouple wires are then gripped in the holding
pliers and pressed against the surface to which they are
to be welded.
The weld switch or footswitch is then pressed triggering
the L60+ welder discharge that will attach the wires to the
applied surface. Once the thermocouple has be success-
fully welded the impact weld clip can be removed.
- 7 -
Advertisement
Table of Contents
