Table of Contents
Advertisement
A. Arc
B. Purge
C. Weld Switch
D. Argon LED
E. Wait LED
F. Ready LED
G. Power
H. Level selector
I. Electrode Holder
J. Red socket
K. Black socket
Front Panel Controls
Argon gas and weld current controlled by
the "Weld" switch. LED indication.
Allows the gas line and electrode shield to
be purged of air prior to a new welding period
Initiates a welding operation (in "arc" mode
also opens the Argon valve).
Indicates when the Argon control valve is
open and gas is flowing.
Glows when weld charge is building.
"Ready to Weld" indication.
Rotary control of the capacitor charge voltage.
Selects the total capacitance available giving
the following values with LED indication.
"LO" = 0 to 6 Joules
"MED" = 0 to 28 Joules
"HI" = 0 to 64 Joules
Holds the replaceable carbon electrode which
is accessible by removing the outer Argon
Shield.
Output socket for using the pliers supplied.
Output socket, this provides an additional
earth point if required.
- 4 -
Advertisement
Table of Contents
