Table of Contents
Advertisement
Setting Up TV
1. Press the Number buttons(0~9) or the " PR "
button to select a program number you want.
2. Locate the selection bar on the Manual tuning at the
Install menu.
• Press the "MENU" button to select the Install menu.
• Move the selection bar to the Install menu with
" / " buttons.
• Place the selection bar on Manual Tuning and press
the " " button.
3. Press the " / " buttons.
• A tuning screen will appear and cursor will move
from left to right or from right to left. If you want to
stop tuning press the "MENU" button.
• After searching a station, you must press the "OK"
button to store the Program.
Note :
• If you are unable to get any programs using Auto Tuning because of a poor reception of the
broadcasting signal, it may still possible to store the channels using Manual tuning.
• If present channel is SECAM L/L', TV set search SECAM L/L'. And if present channel is not SECAM L/L',
TV set search all channels except SECAM L/L' (this is only applicable when receiving french broadcasts)
All manuals and user guides at all-guides.com
Stations
Manual tuning
28
Picture
Screen
Setup
Sound
Function
Install
Manual Tuning
Pr 0
PAL/SECAM
Pr Change
Access
OK Store
MENU
Exit
Advertisement
Table of Contents
