Table of Contents
Advertisement
1. First adjust resolution of the PC (640 x 480, 800 x 600, 1024 x 768, 1360 x 768, 1280 x 1024, 1920 x
1080).
2. Then disconnect your monitor from your PC and connect between PC and TV set using the D-sub and Audio
cable as shown in the picture below.
3. Turn on the PC and TV set.
4. Select PC mode by pressing "HDMI/PC" button on the remote control or "
1. First adjust resolution of the PC (640 x 480, 800 x 600, 1024 x 768, 1280 x 1024, 1920 x 1080).
2. Then disconnect your monitor from your PC and connect between PC and TV set using the HDMI and Audio
cable as shown in the picture below, if necessary. See note below.
3. Turn on the PC and TV set.
4. select HDMI mode by pressing "HDMI/PC" button on the remote control or "
Note :
If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown in the
picture above.
All manuals and user guides at all-guides.com
When connecting with PC(D-Sub) cable.
When connecting with a HDMI cable.
15
PC
Connection
BACK OF THE TV SET
HDMI 1
INPUT
AV1
MONITOR OUT
OPTICAL
HDMI 2
INPUT
PC INPUT
PC AUDIO
BACK OF THE TV SET
AV1
MONITOR OUT
HDMI 1
INPUT
OPTICAL
INPUT
HDMI 2
PC INPUT
PC AUDIO
" button of the TV set.
UP-GRADE PORT
COMPONENT
Pr
Pb
Y
R
L
" button of the TV set.
UP-GRADE PORT
COMPONENT
Pr
Pb
Y
L
R
Advertisement
Table of Contents
