Where To Look For Blockages - Dyson DCO7 Owner's Manual

16831_CAN_DCO7_OPS_WARR.qxd 30/5/07
Where to look for
blockages
CAUTION
• Disconnect the machine
from the electrical outlet
before starting to look for
blockages. Failure to do so
could result in electric shock
or personal injury.
Please note: Should any part
of the machine become blocked,
the motor may overheat and
stop due to the thermal cut-off
being triggered. Disconnect
from electrical outlet and let
the machine cool down for at
least 30 minutes before clearing
the blockage.
Tools
Check that the tools are clear
of blockages.
• Please note: Clearing
blockages is not covered by
your machine's limited
warranty, please call the
Dyson Helpline on
1-877-397-6622.
Dyson Helpline contact us on
16
09:44 Page 16
Wand
Press the wand release button to
remove the wand from the hose.
Check inside wand for blockages.
CAUTION
• Beware of sharp objects
when clearing blockages.
1-877-397-6622
A
B
Hose
A Press the cyclone release catch
to remove the Clear bin
TM
assembly from the machine.
B Press the hose release button
from the front of machine and
slide the hose out from the
rear, holding the lower cord
winder. Check inside the hose
for blockages.