Preparation; Inserting Batteries Into The Remote Control Unit; Mains Connection - DAEWOO ELECTRONICS DSL-15D3 Instruction Manual

Inserting Batteries into the Remote Control Unit

To load the batteries, turn the remote control
handset over and open the battery compartment.
Insert the batteries (Two 1.5v, type R03 or AAA).
Make sure that the polarity matches with the (+)
and (-) marks inside of the battery compartment.
Note: To avoid damage from possible battery
leakage, remove the batteries if you do not
plan to use the remote control handset for
an extended period of time.
1. Connect the DC plug of the AC adaptor to the DC 12V(DC 15V-only 20") input terminal of
the set.
2. Connect the AC adaptor and AC cord.
3. Plug the other end of AC cord into a Power outlet with 100V - 240V AC, 50/60Hz.
Power outlet AC Adapter
AC Cord
All manuals and user guides at all-guides.com

Mains Connection

DC 12V input terminal
(DC 15V-only 20")
9

Preparation