DAEWOO ELECTRONICS DSL-15D3 Instruction Manual page 11

AERIAL CONNECTION WITH VCR
Connect your aerial cable to the RF(aerial) IN terminal on the VCR.
Connect the RF OUT terminal of the VCR to the Aerial terminal on the TV set with
NOTE: If you wish to use only the Aerial (RF) connection, then you should store the VCR
channel on programme number "ZERO"using the "Manual tuning"function (See page 16).
Now you can watch the VCR in TV mode by selecting the programme number "PR00".
All manuals and user guides at all-guides.com
RF IN RF OUT
11
Preparation
VCR
RF cable.