Daily Use; Switching On And Off; Recall - DAEWOO ELECTRONICS DSL-15D3 Instruction Manual

SWITCHING ON
1. If the Indicator is not lit, then the TV set is powered off.
You must press the
The set will switch to stand-by mode and then the Indicator will illuminate in Red.
2. Press the POWER button,
button on the TV set.
The TV set will be switched on and then the Indicator will change to Green.
SWITCHING OFF
1. Press the POWER button on the remote controller to return the set to its stand-by mode.
The Indicator will illuminate in Red.
2. Press the button on the TV set to switch the TV set off completely.
NOTE: If you don't use the set for extended periods of time, unplug the AC cord from Power
outlet.
The Recall button is used to display the current status; Mode (AV, Component, PC) and Signal
information for 4 seconds.
In TV mode, the Programme number and Station Name, Sound mode are displayed.
All manuals and user guides at all-guides.com

Daily Use

Switching On and Off

button on the TV set.
PR button or NUMBER button on the remote controller or

Recall

18
PR