TP-Link CPE Series Quick Start Manual page 19

Quick Start Guide (CPE and WBS)
Note:
There may be two or more networks with the same SSID in the AP list. Click Lock to AP to select the
SSID and AP simultaneously, which can make the device connect to the specific AP next time.
Figure 3-19 Selecting an Upstream Wireless Network
5) In the Wireless Client Settings section, specify the wireless parameters to connect to
the specified wireless network. Click Next .
Note:
Make sure that the Security and PSK Password are the same as the upstream wireless network's.
Other parameters set in this page and those of the upstream wireless network should be compatible
with each other. For details, refer to
Configure the Wireless Parameters.
Set Up the Wireless Network
Configuration Guide 18