Advertisement
2-7-5. Cylinder Ass'y Removal from Cylinder Base
1) Remove three(3) screws 0 from the cylinder base @.
2) Lift the cylinder ass) @from the cylinder base (p in the
direction of arrow.
Fig. 22 Cylinder Ass'y Removal from Cylinder Base
2-7-6. Motor Rotor Removal
2) Lift the retainer lever ass'y @ and the motor rotor @
Fig. 23 Motor Rotor Removal
SCREWS
THREE
RUBBER ASS'Y
MOTOR - ROTOR
2-7-7. Motor Rotor & Cylinder Sub Ass'y
1) Make sure that phase matching holes of the motor rotor
Fig. 16 (Refer to phase matching hole)
2) Reinstall the retainer lever ass'y @and secure with
PHASE MATCHING
Fig. 24 Assembly of Motor Rotor & Cylinder Sub Ass'y
2-7-8. Motor Stator Removal
1) Remove three(3) screws @).
2) Remove the motor stator a from the cylinder sub
ass'y Q.
Fig. 25 Motor Stator Removal
2-l 6
RUBBER ASS'Y
SUB ASS'Y
Advertisement
