Advertisement
2-2-l. Function PCB Removal
1.
Follow the procedures for removing the bottom cover,
the top cabinet and the panel front. (See Fig.1 to 3)
2. Release five (5) tabs on the function board.
3. Release connector(CN701) gently with using the Driver
as shown Fig. 4
Fig. 4 Function PCB Removal
2-2-2. Deck Ass'y Removal
1. Follow the procedures for removing the bottom cover,
top cabinet and the front panel ass'y (See Fig.1 to 3)
2. Remove four (4) screws from the bottom and top of the
deck ass'y.
3. Remove two (2) screws from the bottom of the frame.
4. Lift the deck ass'y upward to remove.
FOUR S C R E W S
Fig. 5 Deck ass'y Removal
2-2-3. Main circuit board Removal
1 .Follow the procedures for removing Fig. 1 to 6
2.Release three (3) tabs from the frame.
3.Pull out the main circuit board in the direction of the
arrow.
TABS
RELEASE THREE
Fig. 6 Main Circuit Board Removal
2-2
Advertisement
