2-8-36. Full Erase Head Removal
Remove one0
screw Q).
Fig. 63 Full Erase Head Removal
2-8-37. ACE Head Removal & Reassembly
(Refer to detail drawing 'A')
3) Lift the magnet ACE head ass'y @.
Assembly
When reinstalling, be sure to align the three
teeth of X-Position adju$tment gear with the
two slot of ACE head base.
NOTE
When adjusting the X-position adjustment gear
using 1~) driver, do not adjust by force.
r - - - - - - -
HOLDER ACE
<DETAIL 'A=>
Fig. 64 ACE Head Ass'y Removal & Reassembly
Remove the cylinder ass'y from the main base.
(Refer to Fig. 19, 20)
ass'y. (Refer to Fig. 58)
to remove. (Refer to arrow)
Fig. 65 Slide Guide Roller 's', 'T Ass'y Removal
2-27