Creating Measuring Unit Patterns For Logger Display - T&D VR-71 User Manual

Creating Measuring Unit Patterns for Logger Display

Creating a Dot Pattern
There are 2 ways to create dot patterns.
Dot Pattern Editing Area.
Saving a Dot Pattern
Save No.
Channel No. Save No.
Reading a Dot Pattern
Save No.
Channel No. Save No.
Distributed by MicroDAQ.com, Ltd.
[Save]
Button
[Load]
Button
1.
Click the
one directly.
2.
By clicking the [Display Pattern] button,
the dot pattern editing area will
appear.
You can create a new pattern by clicking
the mouse on the dots in the dot pattern
editing area.
1.
Put a check on the Channel No. you wish to
save.
2.
Enter the No. you wish to save.
3.
Click [Save] to complete the saving process.
1.
Click the Channel No. of the pattern you wish
to read (upload).
2.
Click the button and select the No. of the
saved pattern you wish to upload or enter that
number directly.
3.
By clicking the [Load] button, the dot pattern
editing area will appear.
www.MicroDAQ.com
and select, or enter a new
(603) 746-5524
27