Maintenance; Declaration Of Conformity; Manufacturer's Warranty - STEINEL Spot Way Sensor Connect Instructions Manual

Android
Following functions can be set via Smart Remote app:
– Time setting
– Twilight setting
– ON and OFF times
– Automatic/manual control, depending on situation
– Interconnection
– Grouping
– Naming groups and lights
Note:
After the light switches OFF, it takes approx. 1 second before it is able to start detect-
ing movement again. The light will only switch ON in response to movement once this
period has elapsed.
The Connect spot has an internal clock for time-based activation and deactivation.
This automatically synchronises with the clock of the connected smartphone via the
Smart Remote app each time a Bluetooth connection is established.
To ensure correct function following an interruption in the light's power supply, it must
be re-connected via the Smart Remote app. The internal clock is re-synchronised
with the smartphone clock.
6. Light tilting/swivelling range / Changing lamp
Light tilting/swivelling range
– Way (Fig. 6.1)
– Garden (Fig. 6.2)
Changing lamp
• Undo glass cover and detach from light enclosure. (Fig. 6.3)
• Disconnect and remove lamp. (Fig. 6.4)
• Insert new lamp and twist to engage. (Fig. 6.5)
• Fit glass cover and twist to engage. (Fig. 6.6)
iOS
– 20 –
Important:
Only use GU10 LED lamp with a wattage up to 9 W.
Note:
• On changing a lamp, make sure that the seal and sealing surface are not soiled or
damaged.

7. Maintenance

The product requires no maintenance.
The light can be cleaned with a damp cloth (without detergents) if dirty.
8. Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and electronic equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment
and its implementation in national law, electrical and electronic equipment no longer
suitable for use must be collected separately and recycled in an environmentally
compatible manner.

9. Declaration of Conformity

Hereby, STEINEL Vertrieb GmbH declares that the radio equipment type Spot Way
Sensor Connect/Spot Garden Sensor Connect is in compliance with Directive
2014/53/EU. The full text of the EU declaration of conformity is available at the follow-
ing internet address: www.steinel.de

10. Manufacturer's Warranty

This Steinel product has been manufactured with utmost care, tested for proper
operation and safety and then subjected to random sample inspection. Steinel guar-
antees that it is in perfect condition and proper working order. The warranty period
is 36 months and starts on the date of sale to the consumer. We will remedy defects
caused by material flaws or manufacturing faults. The warranty will be met by repair
– 21 –