Installation - STEINEL Spot Way Sensor Connect Instructions Manual

Garden spot package contents (Fig. 3.2)
– Light including power cord cable with mains plug
– Ground spike
– Two screws
Way spot product dimensions (Fig. 3.3)
Garden spot product dimensions (Fig. 3.4)
Product parts (Fig. 3.5 – 3.8)
A Light enclosure
B Motion sensor (Way/Garden Sensor Connect spot only)
Light-level sensor (Way/Garden NightAutomatic spot only)
C
D Twilight setting (Way/Garden NightAutomatic spot only)
E Pillar with ground plate (Way spot only)
F Ground spike (Garden spot only)
G Mains power cord with plug
Detection zone for Way/Garden Sensor Connect spot (Fig. 3.9 – 3.14)

4. Installation

• Check all components for damage.
• Do not use the product if it is damaged.
• This light's external, flexible cord cannot be replaced.
If the cord gets damaged, the entire light must be replaced.
• When installing the light, make sure the installation site is not subject to vibration.
• Select an appropriate mounting location, taking the reach and motion detection
into consideration.
Way/Garden Sensor Connect spot only:
The most reliable way to detect movement is given by mounting the light to point
across the direction in which people walk and by making sure no obstacles (e.g.
trees, walls etc.) interrupt the line of sensor vision.
Way mounting procedure
• Fit floodlight head on pillar and turn until it clicks into place. (Fig. 4.1)
• Mark drill holes for ground plate. (Fig. 4.2)
• Drill holes and fit ground plugs. (Fig. 4.3)
• Procedure for mounting light on ground. (Fig. 4.4)
• Connect plug. (Fig. 4.5)
• Make settings. ➜ „5. Function"
– 18 –
Mounting procedure for Garden
• Attach ground spike to light. (Fig. 4.6)
• Push light into ground. (Fig. 4.7)
• Connect plug. (Fig. 4.8)
• Make settings. ➜ „5. Function"
Information for NightAutomatic version
• Make sure that the light-level sensor is not covered (e.g. by leaves).
5. Function
Way NightAutomatic spot / Garden NightAutomatic spot
Factory settings
– Control dial set to = permanently ON
Twilight setting (Fig. 5.2 D)
The light's chosen response threshold can be infinitely varied from
approx. 2 to 1000 lux.
– Control dial set to = permanently ON
– Control dial set to = night-time operation (approx. 2 lux)
For performing the functional test in daylight, the control dial must be set to
Way Sensor Connect spot / Garden Sensor Connect spot
Factory settings
– Twilight setting: 2000 lux
– Time setting: 5 seconds
Smart Remote app
To configure the light via smartphone or tablet, you must download the STEINEL
Smart Remote app from your app store. You will need a Bluetooth-capable smart-
phone or tablet.
– 19 –
.