Setting Clock - Philips X650 Manual

X650_GB_EN.book Page 12 Monday, June 15, 2009 3:44 PM
You can use the phone while it is charging. If the
battery is completely flat, the battery symbol will
only reappear after a few minutes of charging.

Setting clock

1. Check that your phone is switched on.
)
Long press if necessary. Enter the PIN
code if required. A PIN code is a 4- to 8-
digit secret code of your SIM card. It is
preconfigured and communicated to you
by your network operator or retailer.
If you enter an incorrect PIN code three times
in succession, your SIM card will be blocked. To
unblock it, you must request the PUK code from
your operator.
,
2. On idle screen, press Menu and go to
Settings > General > Time & date.
Set format: Select the time (12-hour or 24-
hour clock) and date format by pressing the
< > + -
,
navigation keys , , , and OK.
12
Set time/Set date: Enter the time/date. Press
< >
or to select the box to be defined. Enter
your desired digits by using the numeric
+ -
keypad, or press or repeatedly until
you reach the desired digits.
Clock type: To display time and date on idle
+ -
screen, press or show the time in a clock
(Analog clock) or digits (Digital clock). Press
,
OK to confirm.
Displaying local and international
clocks
You can display two clocks on the idle screen,
one showing your local time and one the time of
your destination.
1. Check that you have set your local time and
date.
2. Go to Settings > General > Time & date.
Check that Clock type is set to Analog clock
or Digital clock.
3. Go to Settings > General > Time & date>
World clock.
Getting Started