To replace the battery
1) To access the battery, remove the battery cover
screw
2) Remove the battery cover by sliding it in the
direction of the arrow.
3) Remove the battery and replace it with the new
battery (ER14250, ½ AA), remember to observe the
correct orientation.
4) Replace the sliding cover and the screw. Test the
fall detector by making a manual call. Inform the
operator that you are making a battery test call.
5) If the device fails to make a test call then check the
orientation of the battery. If this is correct then
contact your supplier.
NOTE: Dispose of used batteries in accordance with the latest
legislation. Do not dispose of in household waste.
-
1
+
3
Page 9 of 12
User Guide
2