Table of Contents
Advertisement
FITTING THE ADJUSTABLE FEET
The adjustable feet must be fitted to the
base of the cooker before use (fig. 9.2).
Rest the rear of the cooker on a piece of
the polystyrene packaging exposing the
base for the fitting of the feet.
Fit the 4 legs by screwing them tight into
the support base as shown in figure 8.3a.
LEVELLING THE COOKER
The cooker may be levelled by screwing
the lower ends of the feet IN or OUT (fig.
9.3b).
BACKGUARD
SOME MODELS ONLY)
Before installing the cooker, assemble the
backguard "C" (fig. 9.4).
•
The backguard "C" can be found
packed at the rear of the cooker.
•
Before
assembling
protective film/adhesive tape.
•
Remove the two spacers "A" and the
screw "B" from the rear of the cooktop.
•
Assemble the backguard as shown
in figure 9.4 and fix it by screwing the
central screw "B" and the spacers "A".
Fig. 9.3b
(SUPPLIED
WITH
remove
Fig. 9.4
any
Fig. 9.2
Fig. 9.3a
SOME MODELS ONLY
C
B
A
45
Hide quick links:
Advertisement
Table of Contents
