Installation Instructions Step 4. Attach Wall Bracket: Attach Wall Bracket to wall using the 4 screws that were installed in 3b. Tighten Securely. Step 5. Install Clamp Bracket: Slide Clamp Bracket onto the Wall Bracket then install the Adjustment Knobs as shown. Pull Clamp Bracket out from the wall as far as possible.
Page 4
Step 6. Install Equipment: Slide equipment into Bracket Assembly as shown. See table below for minimum and maximum equipment widths. Equipment Bracket Assembly Minimum Maximum 104-2109 2.35" 4.00" 104-4010 4.00" 8.00" Step 7. Secure Equipment: Push Clamp Bracket firmly against the equipment, then fully tighten Adjustment Knobs.