No allowance will be made for consequential damage, labor or expenses incurred as the results of a proven defect. In no event will GNC Industries, Inc. be liable for any loss of profits or other consequential damages, even if GNC Industries, Inc. has been advised of the possibility of such damages.
Page 3
Warning: 1. Never point the spray gun at people or animals. 2. The pump will produce high temperatures when operating. 3. Keep hands and clothing clear of the belts and pulleys when operating the pump. Before Use/Start Up: 1.
During Use: 1. Make sure the pump has sufficient liquid supply to allow the pump to reach its working pressure. 2. To prolong the life of the pump, always operate the machine within its specified pressure limits. Adjust the pressure by turning the adjustable regulator knob clockwise.
How to Change Oil: 1. Remove Ref # 12A Drain Plug. Allow the oil and any sludge to drain form the crankcase into an EPA approved collection device. 2. Replace Ref # 12A Drain Plug once the crankcase has been drained. 3.
16. Drive pulley spinning on pump 8. Suction line too small Visit: www.gncindustries.com Support Page For More Information and Videos REPAIR KITS 43-530-200 P 530 & P550 Complete Regulator 43-550-525▲ Pump Packing Rebuild Kit Includes Ref # 45—49N 43-550-335 X Pump Cylinder Assembly 43-550-550 ●...
Quick Reference Pressure Oil Fill Use: Non Detergent Regulator Oil Sight Gauge (On Back Plate) 3/4” Return Pressure Release Secure Pulley Bolt to Gauge Key Way with Blue Lock Tight 1-1/4” Output to Suction Reel Initial Set-Up Check Pump and Engine Oil Levels ...