Advertisement
Radio Programming
The radio does not need to be programmed to recognize the presence of a keypad microphone,
as this is automatically done when the radio is powered on. However, there are a few related
fields that should be configured, as required, to enable the keypad microphone to be
used effectively.
You must power-cycle the radio after replacing the keypad microphone with a program-
ming lead, in order to read or program the radio.
Conventional Forms
In conventional mode, there are check boxes labelled "Selcall Call Dialing", "DTMF Call
Dialing" and "Phone Patch Call Dialing". There is also an option "Conventional Dialing
Type" field, where you can program the radio to dial labels or channels from the default
display.
Refer to the online help of the programming application for more information about these
programming options.
MPT Trunked Forms
In MPT trunked mode, there may be check boxes labelled "DTMF Dialing", "PABX Calls"
and "PSTN Calls". These check boxes need to be selected before you can make these types
of calls.
Refer to the online help of the programming application for more information about these
programming options.
More Information
Refer to your radio provider for more information about this product.
TMAA02-08 Keypad Microphone
© Tait Limited November 2012
3
Advertisement
