Advertisement
2 Slide the microphone grommet along the microphone cord and push two adjacent cor-
ners of the grommet into the microphone socket cavity.
3 Squeeze the grommet and push the remaining corners into position.
4 Check that the grommet is seated correctly in the cavity.
Correct keypad microphone grommet seating
Installing the Microphone Clip
Install the microphone clip in the most convenient location for the radio user. It must be
within easy reach of the user, but in such a position that the microphone PTT key cannot be
inadvertently activated or jammed on.
More Information
Refer to your radio provider for more information about this product.
T02-00005-ABAA/T02-00005-ABBA Keypad Microphones
© Tait Limited July 2013
microphone
grommet
control head
3
Advertisement
