Tait TMAA10-07 Installation Instructions

Introduction

The TMAA10-07 desktop microphone is
an omnidirectional dynamic microphone
which can be used in dispatch situations,
where the microphone is positioned on a
flat surface. The desktop microphone
plugs into the microphone socket on the
radio control head.
The desktop microphone has an internal
pre-amplifier and an adjustable output
control on the underside of the desktop
microphone base.

Operation

Hold down the
MONITOR
whether the channel is clear.
If the channel is clear, press the
the microphone and release the
Note:
The
MONITOR
key down and slide the
MONITOR
should now be locked on.

Installation

Important:
desktop microphone is plugged into the microphone socket. When installed,
the grommet has two functions:
■ to prevent damage to the microphone socket when there is movement of the
microphone cord, and
■ to ensure that the control head is sealed against water, dust and other
environmental hazards.
402-00035-00
key and check
TRANSMIT
TRANSMIT
key can be locked in the 'on' position. To do this, hold the
The desktop microphone grommet must be installed whenever the
Desktop Microphone
Installation Instructions
grommet
key (PTT) to transmit. Speak clearly into
key when you have finished talking.
key towards you. The
LOCK
Tait accessories
TMAA10-07
LOCK
key
TRANSMIT
key
MONITOR
key
key
MONITOR
www.taitworld.com