Connecting Output And Power Supply - Kanomax 6332 Operation Manual

Connecting Output and Power Supply

<Caution>
- Pay attention to the polarity of power supply when connecting.
- Power supply voltage must be DC 12 to 24V.
(*1) FG: Frame Ground -------- Connect to ground (earthing).
(*2) NC: No Connection ------- Connection is not required.
netzerotools.com
FG Terminal
-
DC-IN Term.
+
DC-IN Term.
-
OUT Term.
+
OUT Term.
10
netzerotools.com
FG (*1)
Power Supply Input (-)
Power Supply Input (+)
Signal Output (-)
Signal Output (+)
<NC> (*2)