Thermos EXPRESS 465630503 Owner's Manual page 10

1. Assemble FRONT handle hub to leg as shown below.
a. Insert "foot" into large hole.
b. Press hub flat against leg.
c. Align coach bolt hole with hole in aluminum block.
d. Push long coach bolt through aluminum block on the back side of leg.
e. Permanently attach hub to leg with two self-tapping handle hub screws. DO NOT
OVERTIGHTEN SCREWS. Stripping may occur.
Long coach bolt passes completely
through holes in plinth and leg.
Front Handle Hub
Handle Hub
Screw
2. Assemble REAR handle hub to leg by repeating steps 1a–1e.
Long coach bolt passes completely
through holes in plinth and leg.
10 •
Grill2Go Express
(Part MM)
Foot
Rear Handle
Hub
(Part NN)
Graphics In Front
Graphics In Front
Handle
Hub Screw
Foot