Titan Controls APOLLO 1 Instruction Manual

Repeat cycle timer with photocell

Download this manual

Enlarged version

Notes:

_________________________________________________

Apollo 1

_________________________________________________

Repeat Cycle Timer with Photocell

________________________________________________

Instruction Manual

1 Square = 1 Foot

VANCOUVER, W ASHINGTON U.S.A.

www.titancontrols.net

Need help?

Do you have a question about the APOLLO 1 and is the answer not in the manual?

Page 1 Notes: _________________________________________________ ® _________________________________________________ _________________________________________________ Apollo 1 _________________________________________________ _________________________________________________ _________________________________________________ Repeat Cycle Timer with Photocell ________________________________________________ Instruction Manual 1 Square = 1 Foot VANCOUVER, W ASHINGTON U.S.A. VANCOUVER, W ASHINGTON U.S.A. www.titancontrols.net www.titancontrols.net...
Page 2 _______________________________________________________ with Photocell Overview Send to your nearest location – shipping address will be given when the RMA # is issued: The Apollo 1- Repeat Cycle Timer with Photocell has two adjustment knobs and a switch that may be used to configure the controller to perform as required. www.titancontrols.net The dial knob on the left side of the controller is used to adjust the “On time” of the load output.
Page 3 • All returns or repairs must be accompanied by a Return Merchandise Authorization (RMA) 15 amps of capacity on a standard 120 volt circuit. The Apollo 1 is built with the highest quality number prior to any service of the product.
Page 4 Controller Specifications: Controlling a CO Tank with Generator • Size = 8”H x 4”W x 2.5”D Apollo 1 • Weight = 2 lbs. • Input Voltage = 120 VAC – 60 Hz • Output Voltage = 120 VAC – 60 Hz •...