Advertisement
24 Hour Digital Timer with 1 minute intervals
The 24 hour digital timer with 1 minute intervals will display the current time when
operating. It will control eight (8) separate timing programs. There are many com-
binations of timing available to the user. Such as: hourly, daily, weekly or weekly
settings. Keep timer away from spray or pesticides.
1. To set present time:
a. Press 'CLOCK' and 'HOUR' at the same time for setting the, 'HOUR'.
b. Press 'CLOCK' and 'MINUTE' at the same time for setting the, 'MINUTE'.
c. Press 'CLOCK' and 'WEEK' at the same time for setting the, 'WEEK'.
2. To program:
a. Press 'PROG' to enter into the programming mode. The display will
show '1 ON'.
b. Press 'HOUR', 'MIN' & 'WEEK' to set the hour, minute and day of the
week to activate your equipment.
c. Press 'PROG' again for setting the off time. The display will show '1
OFF'.
d. Repeat (b) above for the off time to deactivate your equipment.
e. Press 'PROG' again to enter into the second timed program, '2 ON', etc.
f. Repeat (a) through (d) to continue setting programmed times.
Note: Press 'R' for cancelling the time setting. Press 'R' again to resume previous
time setting.
3. Combination weekly settings:
a. To program weekly settings press 'WEEK' once. This will display: Mo,
Tu, We, Th, Fr, Sa, Su. Now the timer is in the daily on/off program.
b. Press 'WEEK' again. Now each week day will display on the timer. Set
the desired day of the week that you'd like the timer to activate and
deactivate. Your timer will only activate on that day of the week.
Instructions for Operation
(OVER)
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Titan Controls Apollo 7
Summary of Contents for Titan Controls Apollo 7
- Page 1 24 Hour Digital Timer with 1 minute intervals The 24 hour digital timer with 1 minute intervals will display the current time when operating. It will control eight (8) separate timing programs. There are many com- binations of timing available to the user. Such as: hourly, daily, weekly or weekly settings.
- Page 2 The battery back-up system will protect your settings should you have a power outage. NOTE: We recommend that you plug your Apollo 7/Apollo 9 in for approximately 3 hours before programming to charge internal battery.
Need help?
Do you have a question about the Apollo 7 and is the answer not in the manual?
Questions and answers
how do i initiate it the screen is blank
To initiate the Titan Controls part number 7 when the screen is blank, plug it in for approximately 3 hours to charge the internal battery. This should restore the display.
This answer is automatically generated