After Use; Technical Data - Invacare Propad Revolve V User Manual

Cushion
Table of Contents

Advertisement

Available languages

Available languages

Invacare® Propad®

After Use

Storage
IMPORTANT!
– Store cushions in a dry environment.
– Store cushions within a protective cover.
– Store items on clean, dry surface free from
sharp edges to avoid any possible damage.
– Never store other items on top of a cushion.
– Do not store cushions next to radiators or other
heating devices.
– Protect cushions from direct sunlight.
1. Refer to the storage and shipping conditions in section
Environmental Parameters, page 4 .
General data
Product
Total
Height
[mm]
Propad®
75
Revolve
V
Propad®
75
Revolve
Si
1)
Weights can vary depending on size of cushion ordered, average weights used as an indication.
2)
Maximum user weight limits are set provided that the cushion selected is of appropriate width and depth for the intended
user(s). The maximum user weight limit applies to a 610 mm x 508 mm cushions.
Local requirements / certification available upon request from Invacare®.
Materials
Foam
Polyurethane foam components
Cover
Polyurethane
Fluid sac
Polyether based thermoplastic polyurethane film
All cushion components are Latex-Free.
Environmental Parameters
Ambient temperature
Relative humidity
Atmospheric pressure
4
Total Width
Total Depth
[mm]
[mm]
355 - 610
355 - 508
355 - 610
355 - 508
Operating conditions
10 - 35 °C
30% - 75% Non-Condensing
70 - 106 kPa
Re-use
The product is suitable for repeated use. The number of
times it can be used depends on how often and in which
way the product is used.
1. Before reuse, clean the product thoroughly, see section
Cleaning and care, page 3 .
Disposal
The disposal and recycling of used devices and packaging
must comply with the applicable local legal regulations.
1. Ensure that the cushion is cleaned prior to disposal to
avoid any risk of contamination.

Technical Data

Nominal
Nominal
density range
hardness range
[kg/m
2
]
[N]
HR Foam: 70
160 – 200
70
160 – 200
Inner liner
Polyurethane ether film
Fluid
Silicone
Storage and shipping conditions
-40 - 70 °C
10% - 100%
50 - 106 kPa
Weight of
Minimum /
maximum
product [kg]
1)
user weight
[kg]
2)
40 / 190
1.25
40 / 190
2.5
1590567-C

Advertisement

Table of Contents
loading

This manual is also suitable for:

Propad revolve si

Table of Contents