Cleaning Chart - Thermador CGB30CZLP, CGB36FZLP, CGB48FZLP, CG848FSZLP Care & Use Manual

PART and MATERIAL
Exterior Finish -
Stainless Steel
Drip Tray –
Stainless Steel
Knobs, Skewer Handle
Plastic
Reflectors,
Burner Box –
Stainless Steel
Grates/Grill –
Porcelain on steel
Double-U™ shape
Grill Burner
Stainless Steel

CLEANING CHART

As a safety measure, do not store cleaners
in the storage drawers in the barbecue.
Stainless Steel Finish Protector: Stainless Steel Magic
The quality of this material resists most stains and pitting, providing
the surface is kept clean and protected. Apply to a clean surface.
Nonabrasive Cleaners: detergent and water, Fantastik
Mild abrasive Cleaners: liquid Kleen King
Tip: Keep a thin layer of sand or bird gravel on top of foil liner to absorb
grease.
Cool barbecue. Remove tray and set on a flat surface. Remove foil
liner. Wipe up excess grease with paper towels. Wash with detergent
and hot water or multipurpose cleaner, i.e. 409
and dry; reline with heavy-duty foil. Replace tray. Clean often to avoid
possibility of a grease fire.
Wash with detergent and warm water; rinse and dry.
Discoloration of stainless steel on these parts is to be expected,
due to the intense heat from the burners.
Refer to the Quick Clean Method.
Grates may also be scrubbed with an SOS
cool.
Cool barbecue. Remove grates, radiant baffles and remove hex nuts at
the rear ends of grill burner. Lift grill burner from the rear and remove
wire igniter. Clean the exterior of the grill burner with a wire brush.
Use a straightened paper clip to clear clogged ports. Shake out any
debris through the air shutter. (Do not use a wooden toothpick to clear
any debris in the clogged ports.)
Page 23
SUGGESTED CARE
®
,
®
® ®
and EZ Brite
® ®
, 409 , vinegar.
® ®
or Fantastik . Rinse
pad and hot water when