Miele HS19 Operating Instructions Manual page 9

Technical safety

The AP01 battery, the LG01 charger and the LS03 charger cradle
are designed for use with the Miele HS19 vacuum cleaner. For safety
reasons, the vacuum cleaner must not be used with a battery, char-
ger or charger cradle produced by another manufacturer.

Only the LG01/xx charger or the LS03/xx charger cradle supplied
with the vacuum cleaner can be used to charge the AP01 battery.
Do not use the LG01/xx charger or LS03/xx charger cradle to charge
any other batteries.
xx stands for 01, 02, 03 or 04; these numbers identify the country
version of your LG01 charger and your LS03 charger cradle:
XX
01 AT, BE, BG, CH, CL, CZ, DE, DK, EE, ES, FI, FR, GR, HR, HU, IN, IT, KR,
KZ, LT, LU, LV, NL, NO, PL, PT, RO, RS, RU, SE, SI, SK, TR, UA, ZA
02 AE, GB, HK, IE, MY, SG
03 CA, JP, MX, US
04 AU, CN, NZ

If you are using a mains plug adapter, make sure that it is ap-
proved for continuous operation.

Reliable and safe operation of this vacuum cleaner can only be
assured if the LG01 charger/LS03 charger cradle has been connec-
ted to the mains electricity supply.

Charge the vacuum cleaner at an ambient temperature between
0 °C and 45 °C. During charging, the AP01 battery must be placed in
a well ventilated area.

Stop using the AP01 battery immediately if you notice an unusual
smell from it, if liquid is leaking from it, if it is significantly overheating
or if it is discoloured or deformed. Dispose of the AP01 battery im-
mediately (see safety notice "Disposing of the AP01 battery" at the
end of this chapter as well as "Caring for the environment" – "Dis-
posing of old batteries").
Warning and Safety instructions
9