Use And Operation - Klarstein 10032064 Instruction Manual

EN
14

USE AND OPERATION

Plug in, LED matrix display bright for 2 seconds and make bibi sound, the machine stand
by. All the pressing are invalid except POWER.
1 Touch POWER key to turn on machine in stand by condition; After turn on machine,
all LED light on for 1 second and off for 0.5 second, LED matrix display show "Hi !"
for 2 seconds and into normal display. First time turn on the machine it default medium
wind speed, and turn to low wind speed after 3 seconds. Humidity setting continue.
Touch POWER again, it will stand by and make bibi sound. LED matrix display show
"OFF" and turn off all device in 2 seconds.
Gears: First time turn on the machine it default medium wind speed. Touch GEARS
2
can shift between weak, low, medium and high wind speed. LED matrix display
show: SL > LO > MI > HI.
3 Humidity: Touch HUMIDITY key to into humidity setting and first time turn on the
machine it default humidity continue mode. Setting range: 40%-70%-CO, every
time touch the key it increase 10%. After humidity setting, it turn to high speed until
it meet the setting then stop humidity. Once lower than the setting, it will humidity
again. Press the button to adjust the humidity in the following order: 40% > 50% >
60% > 70% > CO.
Timer: First time turn on machine there is no timer After into timer setting, it will
4
increase one hour every time you touch the key. From 1h-2h-3h-4h-5h-6h-7h-8h-
9h-10h-1 1h-12h-00h cycle. 00h is no timer setting. After timer setting, it will start to
calculate time and turn of in time.(There is no bibi sound when turn off.)
Sleep mode:
5
(a) First time touch sleep mode key, it turn into sleep mode and shows ZZZ for 5
seconds. Gear set low speed and keep other function. There will be no bibi sound
and will show in LED matrx display when lack of water. In sleep mode, all pressing
are invalid except sleep mode key and turn on/off key.