Safety Instuctions; Operation - Klarstein 10029869 Manual

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the follow-
ing hints on installation and use to avoid technical damages. Any failure caused by ignoring the mentioned
items and cautions mentioned in the operation and installation instructions are not covered by our warranty
and any liability.
• To avoid electric shock. Do not open. There are no user serviceable parts inside.
• Specifications are subject to change for improvement without prior notice.
• Check the voltage indicated on the rating plate. This tool is designed for 220V-240 V electric supply.
• Place the appliance on a flat surface and make sure the fridge is not positioned in direct sunlight.
• Do not place any object close to the unit (recommended 4" clearance from sides and back).
• After having finished using the mini dehumidifier, the user should switch the unit off by pressing the „On/
Off" button to „Off" position.
• Avoid using the AC/DC power adaptor in wet or damp place, and position it in areas where the air ventila-
tion is good.
• Keep the front inlet grill and the top outlet grill clear at all times and do not cover with clothing or poly
bags etc.
• The AC/DC Power adaptor will get warm during use. This is normal and does not mean there is a fault.
• Always keep the unit at an up-right position to avoid water leakage.
1. After removing the packaging materials, there should be 2 items:
◦ Mini Dehumidifier
◦ AC/DC Power Adaptor
2. Plug the DC power jack of AC/DC power adaptor to the DC power socket of dehumidifier, then connect
the AC plug of the AC/DC power adaptor to the appropriate main socket.
3. Press the „On/Off" button to „On" position, the mini dehumidifier will begin to operate. The Green LED
will be turned on. Listen and feel for the air blowing from dry air outlet.4. To switch off the unit, press „On/
Off" button to „Off" position, the mini dehumidifier will be turned off.

Safety Instuctions

Operation

4