Download Print this page

AEG STM3 Series Instruction Book page 7

Immersion blender
Hide thumbs Also See for STM3 Series:

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
CLEANING AND CARE
11
Switch the appliance off, remove the plug from the wall socket and wait until the tools have stopped completely.
Warning! Never immerse the housing, plug, or cord in water or any other fluid.
12
Wash all parts, except for the motor base, in warm soapy water. Dry each part thoroughly before use.
All parts, except for potato masher foot, whisk adapter and chopper upper part, can be washed on the top rack
of your dishwasher.
13
The housing should only be cleaned with a soft damp cloth, then dried with a cloth.
Note: Do not use abrasive cleansers or scouring pads to clean the surfaces of your appliance.
Before storage remove the plug from the power outlet. Ensure the appliance is clean and completely dry.
Enjoy your new AEG product!
SAFETY ADVICE
Read the following instruction carefully before using the appliance for the first time.
• Appliances can be used by persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision
or instruction concerning use of the appliance in a safe way and if they understand
the hazards involved.
• Children shall not play with the appliance.
• This appliance shall not be used by children. Keep the appliance and its cord out of
reach of children.
• The appliance may only be connected to a power supply whose voltage and
frequency comply with the specifications on the rating plate!
• Never use or pick up the appliance if
– the supply cord is damaged,
– the housing is damaged.
• If the appliance or the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified person, in order to avoid hazard.
• Always disconnect the appliance from the supply if it is left unattended and before
assembling, disassembling or cleaning.
• Switch off the appliance and disconnect from supply before changing accessories or
approaching parts that move in use.
• Never touch the blades or inserts with your hand or any tools while the appliance is
plugged in.
• Care shall be taken when handling the sharp cutting blades, emptying the bowland
during cleaning.
• The blades and inserts are very sharp! Danger of injury! Caution when assembling,
disassembling after use or when cleaning! Ensure that the appliance is disconnected
from the mains supply.
• The appliance cannot be used for chopping ice or blending hard and dry substance,
such as nut, candy; except with specific accessories provided with the appliance.
Otherwise the blade could be blunt.
• Do not immerse the appliance in water or any other liquid.
www.aeg.com
STM3xxx_ImmersionBlender_AEG NO-FARSI.indd 7
GB
DE
AR
ES
FR
GR
IT
NL
PT
7
2017-07-06 15:18:25

Advertisement

loading