Time And Date Settings - Thecus M3800 User Manual

System Logs
Item
Truncate All Log File
|<< < > >>|
INFO
WARN
ERROR
GO
Ascending
Descending
Download All Log File

Time and Date Settings

From the System menu, choose the Time
item and the Time screen appears. Set the
desired Date, Time, and Time Zone. You
can also elect to synchronize the system
time on the M3800 with an NTP (Network
Time Protocol) Server. You can change
any of these items and press Apply to
confirm your settings.
See the following table for a detailed
description of each item:
Time
Item
Date
Time
Time Zone
NTP Server
WARNING
Description
Clear all log files.
Use the forward ( > >>| ) and backward ( |<< < ) buttons
to browse the log pages.
Provides all log information including warning messages and
error messages.
Shows all warning messages and error messages.
Shows only error messages.
Specify the number of lines per page and press Go.
Shows logs by date in ascending order.
Shows logs by date in descending order.
Export all logs to an external file.
Description
Sets the system date.
Sets the system time.
Sets the system time zone.
Select Yes to allow the M3800 to synchronize with the NTP
server shown below.
Select Manually to allow the M3800 to synchronize with an NTP
server of your choice.
Select No to not have the M3800 to synchronize with an NTP
server.
If an NTP server is selected, please make sure your M3800's network has been
setup to access the NTP server.
43