How To Control Ip Switch Using Hangouts - 5Gstore UIS-522 User Manual

3.4.2. How to Control IP Switch using Hangouts

After setting up and getting connected as
above. Bring up the IP Switch chat
window by inviting it to chat.
*NOTE: Typing in anything other than the
Keywords will invoke IP Switch to respond
with "Please type HELP to list available
commands."
Available commands are (non case
sensitive):
-SET [ON/OFF/RESET] [0/1/2] (where
0=both outlets, 1/2=Outlets)
-UIS [ON/OFF]
-GET [IP/STATUS]
SET ON / OFF / RESET command will
return a "Done!" once IP Switch has
completed the action.
GET IP command will return the WAN IP
and the unit's LAN IP address.
*NOTE: If port forwarding is set, but not the
domain name, user can still use WAN IP to
access the IP Switch Web User Interface
from internet.
GET STATUS command will return the
following information.
For [Outlet Status] the Outlet1 and
Outlet2 name can be assigned. This is
done via the local IP address of the IP
Switch → Configuration → Outlet
Setup
*Use Mobile Device to Control: There is
also a mobile application called "Hangouts"
that can be used in this same manner. It is
available for Android and iOS.
13