Step 2:
Click "Launch Web User Interface" to
open your web browser and access the
Web UI of the unit.
A password dialog box will appear and
prompt you to log in.
By
default;
Username/
password
is:
admin/ admin. Press "OK" to proceed.
Step 3:
You will be logged into the IP Switch.
3.2.2 Locate IP Switch in LAN using fixed IP
By default, the IP Switch should obtain an IP address automatically from your router
using DHCP. If for some reason it does not, it will revert to 0.0.0.0. Using Utility ->
Network Settings will allow you to apply a manual/ static IP setting. You may also
press and hold the UIS button for 10 seconds and it will revert to a fixed LAN IP
of 192.168.0.100.
To access IP Switch Web UI via fixed LAN:
Step 1:
Connect the LAN cable from IP Switch to your PC's Ethernet port
Step 2:
Assign a fixed IP within the same subnet to your PC. Example: IP address:
192.168.0.20;
Subnet
Mask:
255.255.255.0;
Gateway:
192.168.0.1
Step 3:
On your PC, launch a web browser and enter the IP: 192.168.0.100 - Login
username/ password: admin/ admin. You can now change this fixed IP address
to one that you prefer by going to Configuration Settings -> Network.
10