Removing Components - DURKOPP ADLER 581 Additional Instructions

Fitting the sewing lamp

2.1 Removing components

A description of how to remove the clamping plates is provided in the
 Operating Instructions.
To remove the other components:
Step
1. Remove the screws (2).
2. Remove the finger protection (1).
Fig. 2: Removing the finger protection
(1) - Finger protection
3. Remove 3 screws (3) (width across flats 3) from the housing for the
Fig. 3: Detaching the housing
(3) - Screws
Additional Instructions 581 - 00.0 - 02/2015
drive belts (4).
(2) - Screws
(4) - Housing
②
①
④
③
5