Samsung Duct Type Series Installation Manual page 35

Changing a particular option
You can change each digit of set option.
Option SEG1
Explanation PAGE
Remote
Controller
Display
Indication Details
Indication
and Details
0
• When changing a digit of an indoor unit address setting option, set the SEG3 as 'A' .
• When changing a digit of indoor unit installation option, set the SEG3 as '2' .
NOTE
Ex) When setting the 'buzzer control' into disuse status.
Option
Explanation
Indication
• If you are using heat pump model, mixed operation mode (two or more indoor units operating in diff erent
operation mode simultaneously) is not available when the indoor units are connected to same outdoor unit. If
CAUTION
you set the master indoor unit with a remote controller, outdoor unit will operate in the mode which was set in
the master indoor unit.
SEG2 SEG3
MODE Option mode to change
Indication Details Indication
Option
D
mode
SEG1 SEG2
PAGE MODE
0 D
SEG4
Tens digit of option SEG Unit digit of option SEG
to change
Details Indication Details
Tens digit
1~6 0~9
of SEG
SEG3 SEG4
Tens digit of
Option mode
option SEG to
to change
change
2 1
SEG5 SEG6
Changed value
to change
Indication Details Indication
Unit digit Changed
0~9
of SEG value
SEG5 SEG6
Unit digit of
option SEG to Changed value
change
7 1
Details
0~F
35