General Maintenance; Troubleshooting - Ryobi RBV-3350 Owner's Operating Manual

WARNING. Before inspecting, cleaning,
or servicing the machine, shut off motor,
wait for all moving parts to stop, and
disconnect extension cord. Failure to
follow these instructions can result in
serious personal injury or property
damage.

GENERAL MAINTENANCE

Avoid using solvents when cleaning plastic parts.
Most plastics are susceptible to damage from
various types of commercial solvents and may be
damaged by their use. Use clean cloths to remove
dirt, dust, oil, grease, etc.
IF THESE SOLUTIONS DO NOT SOLVE THE PROBLEM, CONTACT YOUR AUTHORIZED SERVICING DEALER.
PROBLEM
Motor won't start
Material is not sucked in properly (re-
duced vacuuming power)
MAINTENANCE
STORAGE (1 MONTH OR LONGER)
Clean all foreign material from the blower.
Store indoors in a place that is inaccessible to
children. Keep away from corrosive agents such as
garden chemicals and de-icing salts.

TROUBLESHOOTING

CAUSE
Lower tube hasn't been telescoped
out to its full length
No power (power failure)
Connection lead wire defect
Motor or switch defect
Machine is clogged or blocked
Vacuum bag too full
Speed setting too low
11
WARNING. Do not at any time let brake
fluids, gasoline, petroleum based
products, penetrating oils, etc., come in
contact with plastic parts. Chemicals can
damage, weaken or destroy plastic
which may result in serious personal
injury.
REMEDY
Pull the lower tube out to its full
length.
Check circuit breaker.
Check fuse
Check circuit breaker.
Replace lead or have lead checked
(electrician); never use defective lead.
Contact the authorized service center.
Clean tool
Empty bag
Adjust to higher speed