Table of Contents
Advertisement
Safety Precautions
The outside ducts must be tilted
at a gradient (1/30 or more) down
toward the outdoor area from the
ventilator unit, and properly insu-
lated. (The entry of rain water may
cause power leaks, fire or damage
to household property.)
n Installation
Don't connect the
ground wire to the win-
dow frame or water
cock.
• There is risk of electric
shock.
Keep level even when
installing the prod-
uct.
• To avoid vibration or
water leakage.
6 Ventilator
Glove should be worn when doing
the installation work. (There is
risk of injury.)
CAUTION
Do not install the prod-
uct at a smoky and oily
place like kitchen or
factory.
• Otherwise. oil may
adhere to the filter or
heating exchanger and
cause trouble.
Use two or more peo-
ple to lift and trans-
port the product.
• Avoid personal injury.
Install the product in
an insulated space
from outdoor air.
• In case of installing the
product outside of the
insulated layer, dewing
occurs inside of the
main body in winter.And
it causes electrical
shock or falling of con-
densed water.
Do not install the
product where it will
be exposed to sea
wind (salt spray)
directly.
• It may cause corrosion
on the product. Corro-
sion, particularly on the
condenser and evapora-
tor fins, could cause
product malfunction or
inefficient operation.
Advertisement
Table of Contents
