Advertisement
Brought to You by Augusta Flint
2.
MAKE SURE THE POWER SWITCH IS IN THE "OFF" POSITION BEFORE
PLUGGING IN THE POWER CORD.
3.
DO NOT ABUSE THE POWER CORD. Do not use the cord to pull the 3-prong
plug from a power outlet. Keep cord away from heat, oil, sharp edges, and
moving parts. Replace damaged cord immediately. Route the power cord safely.
Protect it from being damaged by other equipment in the shop. Do not route the
cord where it can be walked on or tripped over.
4.
IF YOU USE AN EXTENSION CORD, MAKE SURE TO USE ONLY UL AP-
PROVED CORDS HAVING THE CORRECT GAUGE AND LENGTH. (SEE
FIGURE A.)
Nameplate
Amperes
0-5
5.1 - 8
8.1 - 12
12.1 - 15
15.1 -20
FIGURE A
5.
MAINTAIN A SAFE WORK ENVIRONMENT. Do not use this tool in or near
damp or wet areas. Do not expose this tool to rain. Keep work area well lit.
Make sure there is adequate surrounding work space. Use this product in a well
ventilated area. Do not operate this product in the presence of flammable liquids,
gases, or dust. To avoid accidental electric shock, do not let your body come in
contact with grounded surfaces such as pipes, radiators, ranges and refrigera-
tors.
6.
DO NOT FORCE THE EQUIPMENT. This tool will do the work better and safer
at the speed and capacity for which it was designed.
7.
KEEP ALL GUARDS IN PLACE AND IN WORKING ORDER.
8.
REMOVE ALL ADJUSTING WRENCHES FROM THE TOOL BEFORE TURN-
ING ON THE PLANER.
9.
AVOID UNINTENTIONAL STARTING. Make sure you are prepared to begin
work before turning the START switch on.
SKU 45376
Extension Cord Length
25'
50'
75'
16
16
16
16
16
14
14
14
12
12
12
10
10
10
10
PAGE 4
100'
150'
14
12
12
10
10
-
10
-
-
-
200'
12
-
-
-
-
Advertisement
