Advertisement
Brought to You by Augusta Flint
Net Weight
Electrical Requirements
Planer Width
Rabbeting Guide Adjustment
Blade Hardness
Depth Adjustment
You will need this manual for the safety warnings and precautions, assembly and
operating instructions, cleaning, inspection, and maintenance procedures, parts
list and diagram. Keep your invoice with this manual. Write the invoice number on
the inside of the front cover. Keep this manual and invoice in a safe and dry place
for future reference.
GENERAL SAFETY WARNINGS AND PRECAUTIONS
1.
KEEP WORK AREA CLEAN AND DRY. Cluttered, damp or wet work areas
invite injuries.
2.
KEEP CHILDREN AWAY FROM WORK AREA. Do not allow children to handle
this product.
3.
STORE IDLE EQUIPMENT. When not in use, tools and equipment should be
stored in a dry location to inhibit rust. Always lock up tools and equipment, and
keep out of reach of children.
4.
DO NOT USE THIS PRODUCT IF UNDER THE INFLUENCE OF ALCOHOL OR
DRUGS. Read warning labels on prescriptions to determine if your judgment or
reflexes are impaired while taking drugs. If there is any doubt, do not attempt to
use this product.
5.
USE EYE, HEARING, AND BREATHING PROTECTION. Wear ANSI approved
safety impact eye glasses, ANSI approved hearing protection, and ANSI ap-
proved dust mask or respirator when using this product. ANSI approved safety
impact eye glasses, hearing protection, and dust masks and respirators are
available from Harbor Freight Tools.
SKU 45376
SPECIFICATIONS TABLE
ITEM
8.0 Lbs.
115V / 60 Hz / 750 Watts
6.5 Amp Motor
4"
Up To 3/4"
55-65 HRC
0-0.7" (0-2mm)
SAVE THIS MANUAL
PAGE 2
DESCRIPTION
Advertisement
