Download Print this page

Blade - CHICAGO 45376 Assembly And Operating Information

Electric power tools. 4” planer

Advertisement

Brought to You by Augusta Flint
5.
Reattach the Housing (part #28), and securely tighten the Self-Tapping Screw
(part #21).
DRIVEN PULLEY (25)
CLEANING, INSPECTION, AND MAINTENANCE
Caution: Always disconnect the Planer from its electrical power supply source
1.
before performing any cleaning, inspection, or maintenance.
2.
Before each use, inspect the general condition of the Planer. Inspect switch,
power plug and cord assembly, and extension cord (if used) for damage. Check
for loose screws, misalignment, binding of moving parts, improper mounting,
broken parts, loose or damage Cutter Blades and any other condition that may
affect its safe operation. If abnormal noise or vibration occurs, turn off the Planer
immediately and have the problem corrected before further use. Do not use
damaged equipment.
3.
Do not introduce water into the electric motor through the motor vents.
4.
Do not use solvents to wipe off the Planer, as damage may result.
5.
With a brush or soft cloth, remove all the sawdust from the Planer.
6.
If necessary, wipe with a damp cloth. You may use a mild detergent.
7.
Once clean, lubricate all moving parts with a light oil.
8.
When storing, keep the Planer in a box, or cover with a cloth cover.
THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER
THE MANUFACTURER NOR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS
QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT. IN FACT,
THE MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS REPLACEMENTS SHOULD BE UNDERTAKEN BY
CERTIFIED AND LICENSED TECHNICIANS AND NOT BY THE BUYER. THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF HIS OR
HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACE-
MENT PARTS THERETO.
SKU 45376
DRIVE BELT (26)
PLEASE READ THE FOLLOWING CAREFULLY
PAGE 11
DRIVING PULLEY (18)
FIGURE G

Advertisement

loading