Hallde VCB-32 User Instructions

Vertical cutter blender

Hide thumbs Also See for VCB-32:

Table of Contents

Download this manual

UsER INsTRUCTIoNs

VERTICAL CUTTER BLENDER VCB-32

Made in sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd.

All standard Hällde products are designed to run at 220-240V per phase, 50Hz.

All specifications are nominal only. All information contained in this instruction is subject to change without notice

due to constant research and development. AB Hällde Maskiner reserves the right to make changes to machines,

accessories and cutting tools.

Roband Australia Pty Ltd

All care has been taken to ensure correct information at time of printing. AB Hällde Maskiner

1 Inman Road,

accepts no responsibility for printing errors.

Cromer, NsW 2099

Australia

Tel: +61 2 9971 1788

Fax: +61 2 9971 1336

www.roband.com.au

robandaustralia

0319

Email: sales@roband.com.au

Table of Contents

Need help?

Do you have a question about the VCB-32 and is the answer not in the manual?

Page 1 UsER INsTRUCTIoNs VERTICAL CUTTER BLENDER VCB-32 Made in sweden. Exclusively distributed and serviced in Australa by Roband Australia Pty Ltd. All standard Hällde products are designed to run at 220-240V per phase, 50Hz. All specifications are nominal only. All information contained in this instruction is subject to change without notice due to constant research and development.
Page 2 4 seconds after the handle anti-clockwise as far as it will go in the lid has been lifted and turned anti-clockwise scraper ring and the three parts are joined. as far as it will go. HALLDE • User Instructions...
Page 3 TROUBLE SHOOTING To eliminate the risk of damage to the motor, the VCB-32 is fitted with thermal motor protection that automatically switches off the machine if the temperature of the motor should become too high. The thermal motor protection...
Page 4 Combi Cutter CC-32S, CC-34 and Vertical Cutter Blender VCB-32 HALLDE • User Instructions...
Page 5 SUPPLIER P.O. Box 1165, SE-164 26 KISTA, Sweden ADDRESS DECLARE UNDER OUR SOLE RESPONSIBILITY THAT THE FOLLOWING PRODUCTS: VCM-41, FP-41, VCM-42, FP-42, VCB-32, VCB/HCB-32, VCB-61, MODEL NAME VCB/HCB-61, HCM-61, VCB-62, VCB/HCB-62, HCM-62, SB-4, HB/FP-4. SERIAL NUMBER CONFORM TO THE FOLLOWING DIRECTIVES AND STANDARDS...